• Our experts are familiar with your industry and requirements
  • Our global network ensures we are close at hand wherever and whenever you need us
  • We have the expertise and tools to provide you with the best possible support and advice
 Contact us now
Your benefits

Various target systems – software can be set up flexibly
on the controllers from SEW-EURODRIVE or on Edge units, or on process-related IT systems on the customer side.

Retrofitting possible – Condition Monitoring even for existing systems
for environments with Ethernet-based fieldbus systems, because the devices can be connected to the software via radio or cable through existing network channels.

Meaningful data – Smart Data
because it is possible to access the entire data range and the real-time-capable scope functions, so the system obtains the most meaningful information.

Easy to use – configurable
thanks to the individual setup of the desired data packages through a wide range of configuration options on the user interface. The upload can be synchronised with the process or given a time delay.

Collecting and converting sensor data from frequency inverters and controllers

The DriveRadar ® DataCollector software turns all the Generation B electronic drive inverters (control cabinet technology and decentralised technology) into "smart devices" that supply valuable information directly from the application for Condition Monitoring and in-depth system analyses.

In this way, our frequency inverters and controllers detect IIoT device and sensor data, which can then be recorded automatically and saved in the form of JSON files . This includes both scope recordings and also individual parameters.

To allow the device-specific, coded values obtained in this way to be converted into conventional file formats and saved in the end, the conversion tool DriveRadar ® DataConverter should also be downloaded and installed in addition to the DataCollector.

DriveRadar® DataCollector and DataConverter – always together as a team

An ideal result can only be achieved by using both the software tools together, as they are coordinated with each other. They should therefore be set up together, either on process-related IT systems on the customer side, on Edge units, or on controllers from SEW-EURODRIVE.

An overview of the functions of the DriveRadar ® DataCollector software:

  • Provision of IIoT device and sensor data (scope data and device parameter data) through automatic or manual recording and saving
  • Automatic parameterisation of the device scopes

An overview of the functions of the DriveRadar ® DataConverter software:

  • IloT sensor data coded for specific devices (scope data and device parameter data) from the JSON files generated by the DriveRadar ® DataCollector are converted into directly usable device values
  • Manual or automatic conversion is possible
  • Source and target directories for JSON files can be chosen as required
Contact form Worldwide locations Locations in the UK