 |
MOVIMOT® gearmotor with integrated frequency inverter
|
|
MOVIMOT®, the gearmotor with integrated
frequency inverter, is a reliable combination of gearmotor and digital
frequency inverter in the power range from 0.37 to 4.0 kW. Despite
the integrated frequency inverter, MOVIMOT® needs
only a minimum of additional space than standard gearmotors and
can be supplied in all standard versions and mounting positions
with and without brake for supply voltages of 380 to 500 V and 200
to 240 V. An IP54 enclosure is available as standard, but the MOVIMOT® gearmotor is also available
in IP55, IP65 and IP66 enclosures on request. This gearmotor is
a robust and compact version for a number of decentralized drive
solutions. SEW-EURODRIVE offers an optional SafetyDrive package
for equipping plants that have to comply with the requirements of
safety category 3 according to EN 954-1.
NEW: MOVIMOT® in combination with the
new DR motor series is available in various efficiency levels.
|
|
Technical data
|
|||||
|---|---|---|---|---|---|
|
Speed range [rpm]
|
Voltage [V]
|
Connection
|
Approval
|
Power [kW]
|
Torque [Nm]
|
|
280 ... 1400 (1700)
|
3 x 380
... 500 (400)
|
Star
|
IEC or
cULus
|
0.37 ... 4.0
|
2.52 ... 27.5
|
|
290 ... 2900
|
Delta
|
0.55 ... 4.0
|
1.81 ... 13.2
|
||
|
280 ... 1700
|
3 x 200 ... 240 (230)
|
Star-Star
|
0.37 ... 2.2
|
2.08 ... 12.4
|
|
|
Options
for MOVIMOT®
|
||
|---|---|---|
|
Brake
control
BEM/URM
|
 |
MOVIMOT® can
be equipped with a BEM or URM brake control system as an option
in conjunction with a modular terminal box. The option is integrated
in the MOVIMOT® terminal box.
|
|
Braking
resistor
BW100... / BW200...
|
 |
The
BW100.../BW200... braking resistors in IP65 enclosure convert the MOVIMOT® drive's regenerative energy
of up to 100 W/200 W continuous power into heat.
|
|
Braking
resistor
BW150... / BW068...
|
 |
The
BW150.../BW068... braking resistors in IP66 enclosure convert the MOVIMOT® drive's regenerative energy
of up to 600 W/1200 W continuous power into heat.
|
|
DC 24 V power supply MLU11A
|
 |
The MLU11A DC 24 V option
is mounted in a cable gland of the MOVIMOT® and
enables one MOVIMOT® including
an option with a current consumption of up to 70 mA (MBG11A, MWA21A)
to be operated without an external 24 V auxiliary power supply.
|
|
DC 24 V power supply MLU13A
|
 |
The MLU13A DC 24 V option
is mounted in the terminal box of the MOVIMOT® and
enables one MOVIMOT® including
an option with a current consumption of up to 70 mA (MBG11A, UWA21A)
to be operated without an external 24 V auxiliary power supply.
|
|
MLG speed control module
|
 |
The optional MLG..A speed
control module is mounted in a cable gland of MOVIMOT® and offers the possibility
of adjusting the input speed in the range of -100% to +100 % fmax (potentiometer f1) as well as of
powering the inverter with the DC 24 V auxiliary voltage.
|
|
MBG11A speed control module
|
 |
The optional MBG11A speed
control module has two keys and a display. MBG11A makes it possible
to adjust the speed remotely in the range from -100% to +100 % fmax (potentiometer f1). Up to 31 MOVIMOT® units can be controlled
at the same time (broadcasting).
|
|
MWA21A setpoint converter
|
 |
The optional MWA21A setpoint
converter converts an analog setpoint and the control signals into
an RS-485 protocol. The MWA21A enables the MOVIMOT® to
be controlled remotely from the control cabinet. Up to 31 MOVIMOT® units can be controlled
at the same time (broadcasting).
|
|
DBG60B keypad
|
 |
The
DBG60B keypad can be used to control MOVIMOT® drives
with integrated AS interface in manual mode. Furthermore, important
information can be displayed in monitor mode.
The DBG60B keypad is connected to the diagnostic
interface in the MOVIMOT® terminal box.
|
|
MDG11A diagnostic unit
|
|
The optional MDG11A diagnostic
unit indicates the operating status, output current, terminal states
and MOVIMOT® error codes
when errors occur.
|
|
MNF11A line filter
|
 |
The MNF11A line filter
option is mounted in the MOVIMOT® terminal
box and allows for a drive system that complies with the emitted
interference stipulated in EN 61800-3 as well as with the class
B limit according to EN 55011 and EN 55014.
|
|
P2.A for mounting close
to the motor
|
 |
The P2.A option allows
the MOVIMOT® inverter to
be mounted close to the motor. The inverter is connected to the
motor using a pre-fabricated hybrid cable. MOVIMOT® with option
P2.A is supplied in enclosure IP65.
|
| back to top |
