High-performance drive inverter for dynamic drives in power range 0.55 to 160 kW (0.74 to 215 hp). Great diversity of applications due to extensive expansion options with technology and communication options. 3-phase mains connection for AC 230 V and AC 400 to 500 V.

200/240 V / 3-phase

1.5 to 37 (2.0 to 50)

400/500 V / 3-phase

0.55 to 160 (0.75 to 215)

The keypad is used for startup and service. The basic MOVIDRIVE^® version does not have a keypad and can be upgraded as an option.

The option capable MOVIDRIVE^® MDX61B units can be equipped with the HIPERFACE^® encoder card type DEH11B. The encoder card offers one input for the motor encoder and one input for an external encoder, also referred to as synchronous encoder. The input for the external encoder can also be used as an output for incremental encoder simulation.

Option-capable MOVIDRIVE^® MDX61B units can be equipped with resolver card type DER11B. The resolver card offers one input for the resolver as motor encoder and one input for an external encoder, also referred to as synchronous encoder. The input for the external encoder can also be used as an output for incremental encoder simulation.

The option capable MOVIDRIVE^® MDX61B units can be equipped with absolute encoder card type DEH21B. The absolute encoder card offers one input for the motor encoder and one input for an external absolute encoder with SSI interface.

Option-capable MOVIDRIVE^® MDX61B units can be equipped with absolute encoder card type DIP11B. Option DIP11B supplements MOVIDRIVE® with an SSI interface for absolute encoders.

The UWS21B option converts RS-232 signals, for example from the PC, into RS-485 signals. These RS-485 signals can then be routed to the XT slot of the MOVIDRIVE^® basic unit.

Option USB11A enables a PC or laptop with a USB interface to be connected to the XT slot of MOVIDRIVE^®. The USB11A interface adapter supports USB 1.1 and USB 2.0.

Option-capable MOVIDRIVE^® MDX61B units can be equipped with input/output card type DIO11B. Option DIO11B expands the binary and analog inputs and outputs of the basic MOVIDRIVE^® unit.

The option-capable MOVIDRIVE^® MDX61B units can be equipped with the PROFIBUS interface type DFP21B. Option DFP21B is a 12-MBaud fieldbus interface for the PROFIBUS-DP serial bus system. The principal task of PROFIBUS-DP is to transmit data in rapid cycles between central automation units (PROFIBUS master) and decentralized peripheral units (such as drive inverters).

Option-capable MOVIDRIVE^® MDX61B units can be equipped with INTERBUS interface type DFI11B. Option DFI11B is an interface for the non-proprietary and standardized serial INTERBUS sensor/actuator bus system. INTERBUS functions include a process data channel and parameter data channel. Intelligent actuators such as the MOVIDRIVE^® inverter can be controlled and parameterized in a user-friendly way.

Option-capable MOVIDRIVE^® MDX61B units can be equipped with INTERBUS LWL interface type DFI21B. Option DFI21B is an interface for the non-proprietary and standardized serial INTERBUS sensor/actuator bus system with fiber optic cables. INTERBUS functions include a process data channel and parameter data channel. Intelligent actuators such as the MOVIDRIVE^® inverter can be controlled and parameterized in a user-friendly way.

Modubs/TCP DFE11B Ethernet interface

PROFINET I0 DFE12B / DFE32B Ethernet interface

Ethernet interface EtherNet/IP DFE13B / DFE33B

EtherCAT DFE24B

Option-capable MOVIDRIVE^® DX61B units can be equipped with DFE11B/12B/13B/DFE24B/DFE32B/DFE33B Ethernet interfaces. Options DFE11B/12B/13B/DFE24B/DFE32B/DFE33B are interfaces for connecting higher-level automation, project planning and visualization systems via Ethernet. You can use options DFE11B/12B/13B/DFE32B/DFE33B to communicate directly with the inverters via Ethernet to change parameters and programs and to operate the MOVITOOLS^® MotionStudio software. An integrated Web server makes it possible for the user to access diagnostic values quickly and easy using a standard browser (e.g. Internet Explorer). The DFE24B option provides a synchronous connection for motion control applications.

Option-capable MOVIDRIVE^® MDX61B units can be equipped with Devicenet interface type DFD11B. Option DFD11B is an interface for connecting to higher-level automation, project planning and visualization systems via the non-proprietary and standardized DeviceNet fieldbus system.

Option-capable MOVIDRIVE^® MDX61B units can be equipped with CAN/CANopen interface type DFC11B. The DFC11B option provides a potentially isolated second CAN interface for connection to CANopen networks, or for communication via the MOVILINK profile which is specifically designed for units from SEW-EURODRIVE.

Option-capable MOVIDRIVE^® MDX61B units can be equipped with absolute encoder card type DIP11B. Option DIP11B supplements MOVIDRIVE^® with an SSI interface for absolute encoders.

The DRS11B option enables a group of motors to run in angular synchronous operation or in an adjustable proportional relationship. The basis for synchronous operation is the continuous comparison of the rotor angle positions of the master and slave motors. The motors must be equipped with encoders for this purpose. The DRS11B option is plugged into the expansion slot.

Movements can be safely monitored using the integrated safety technology according to EN 954-1, safety categories 3 and 4. Monitoring movements instead of shutting down machines makes for a great variety of process improvements and therefore offers high saving potential.

Option-capable MOVIDRIVE^® MDX61B units can be equipped with safe fieldbus interfaces with PROFIsafe protocol. These PROFIsafe interfaces are available for PROFIBUS and PROFINET.

Controllers

MOVI-PLC^® basic

DHP11B-TO / T1 / T2

MOVI-PLC^® advanced

DHE41B

DHF41B

With the MOVI-PLC^® basic DHP11B-Tx controllers, SEW-­EURODRIVE's product portfolio includes user-programmable controllers compliant with the IEC 61131-3 and PLCopen standards. This facilitates integration and programming of logic and motion control in one program and in accordance with international standards. ­Various unit versions are available to support the implementation of powerful technology and application libraries.

The MOVITOOLS^® MotionStudio program package allows you to conveniently start up and set parameters for MOVITRAC^® B frequency inverters and MOVIDRIVE^® MDX60/61B inverters.

The MDR60A regenerative power supply can be used to supply several units with power via a central power supply connection. In regenerative operation, the power is fed back into the supplying power supply. Using MDR60A saves energy and installation work.

BW series braking resistors are available for operating MOVITRAC^® B frequency inverters and MOVIDRIVE^® MDX60/61B drive inverters as generators. With integrated temperature sensor, the resistor can be protected without external monitoring.

ND series line chokes increase inverter overvoltage protection. This is an important characteristic in rough industrial power supply systems, especially if the inverter is installed near a supply transformer.

NF type line filters are available for EMC compliant installation as specified by EN 55011. They suppress interference emissions on the line side of inverters. These line filters ensure that limit value class B is maintained on the supply end.

HD series output chokes suppress interference emitted from unshielded motor cables. They enable the motor to meet limit value class B requirements in accordance with EN 55011 in EMC-compliant installations. Output chokes provide an alternative to shielded motor cables in EMC-compliant installations.

HF series output filters are sine filters that smooth out inverter output voltage. Output filters are used for group drives to suppress discharge currents in motor cables and for long motor cables to prevent voltage peaks.